Dynomotion

Group: DynoMotion Message: 4162 From: Bengt Sjoelund Date: 3/5/2012
Subject: Mach3 Screen set
Hi,
where can I find modified screen set?
Cheers
Bengt
Group: DynoMotion Message: 4163 From: Tom Kerekes Date: 3/5/2012
Subject: Re: Mach3 Screen set
Hi Bengt,
 
I'm not sure what you are asking.  KMotionCNC can select different "Dialog Faces" under:
 
Tool Setup | Tool Setup Files
 
Regards
TK

From: Bengt Sjoelund <cnc@...>
To: DynoMotion@yahoogroups.com
Sent: Monday, March 5, 2012 4:12 AM
Subject: [DynoMotion] Mach3 Screen set

 
Hi,
where can I find modified screen set?
Cheers
Bengt



Group: DynoMotion Message: 4164 From: carlcnc Date: 3/5/2012
Subject: Re: Mach3 Screen set
Bengt
MAch 3 screen sets come from Mach 3

Machsupport.com
Carl

--- In DynoMotion@yahoogroups.com, "Bengt Sjoelund" <cnc@...> wrote:
>
> Hi,
> where can I find modified screen set?
> Cheers
> Bengt
>
Group: DynoMotion Message: 4167 From: Bengt Sjoelund Date: 3/5/2012
Subject: Re: Mach3 Screen set
OK, my swinglish is not clear.
As I can see there are buttons to be edited for Kflop to work so I just wanted to know if these screens can be downloaded, if not then I have to edit the screens as described in Mach3 doc's from Dynomotion.
Easier if this is done and can be dowloaded (yes I'm a bit lazy)
Cheers
Bengt

--- In DynoMotion@yahoogroups.com, "carlcnc" <cebcnc@...> wrote:
>
> Bengt
> MAch 3 screen sets come from Mach 3
>
> Machsupport.com
> Carl
>
> --- In DynoMotion@yahoogroups.com, "Bengt Sjoelund" <cnc@> wrote:
> >
> > Hi,
> > where can I find modified screen set?
> > Cheers
> > Bengt
> >
>
Group: DynoMotion Message: 4168 From: Tom Kerekes Date: 3/5/2012
Subject: Re: Mach3 Screen set
Hi Bengt,
 
No you will need to edit them yourself as we don't know what screen set you prefer and we are a bit lazy too :}
 
Regards
TK

From: Bengt Sjoelund <cnc@...>
To: DynoMotion@yahoogroups.com
Sent: Monday, March 5, 2012 11:18 AM
Subject: [DynoMotion] Re: Mach3 Screen set

 
OK, my swinglish is not clear.
As I can see there are buttons to be edited for Kflop to work so I just wanted to know if these screens can be downloaded, if not then I have to edit the screens as described in Mach3 doc's from Dynomotion.
Easier if this is done and can be dowloaded (yes I'm a bit lazy)
Cheers
Bengt

--- In DynoMotion@yahoogroups.com, "carlcnc" <cebcnc@...> wrote:
>
> Bengt
> MAch 3 screen sets come from Mach 3
>
> Machsupport.com
> Carl
>
> --- In DynoMotion@yahoogroups.com, "Bengt Sjoelund" <cnc@> wrote:
> >
> > Hi,
> > where can I find modified screen set?
> > Cheers
> > Bengt
> >
>